Removal of wooden butt pad.

Help Support :

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
T

TEABAG

Well-known member
Joined
Jul 24, 2015
Messages
83
Just purchased a Caesar Guerini game model, with the butt pad is in matching wood.

I would like to convert it to a cushioned type, having rmoved the two screws, it seems the wood is ""stuck" on.

Could this be glued, or am i being too cautious , as i don`t want to mark the stock by trying to prise it off.

Anyone had a similar situation?

 
It may just be the oil finish that's holding it tight, acting like a glue between the two pieces of wood. Try tapping the butt with something that will not mark the wood

Edit: it has to be removable to access the stock bolt

 
Last edited by a moderator:
It's probably just the stock oil holding the pad on as CGs come with oil applied to the bare wood under the pad. Glued on pads are unusual and the only maker I know who do it is Perazzi - or at least they used to.

A bit of gentle persuasion should take care of it. 💪

 
You must log in or register to reply here.

Similar threads

E
huntinggunz.com
Replies
0
Views
396
erwinspencer17
E
webber
webber & Gunner Gordons Scotland Trip 2013
Replies
0
Views
274
webber
webber

Latest posts

Back
Top