Doctor Lecter
Well-known member
recommendations please for fixed choke adjustment I am based in Lincolnshire , cost and job time cheers !
choke adjustment
- Thread starter Doctor Lecter
- Start date
Help Support :
chippy
Well-known member
Buy a set of expanding reamers and do it yourself
MartynB
Well-known member
The obvious choice is Elderkins . It’s not a very big job i’d guess £40 or £50 a barrel . Obviously turnaround depends on how busy any particular gunsmith is .
Jonny English
Well-known member
Derek Lee's at Tumby as well just south of horncastle do a very good job.
G
Guest
Guest
I always thought chokes were honed out rather than reamed?
Many , many fine engineers here in Britain , Teague do specialise and I highly recommend .
But opening out chokes is not exactly difficult, as mentioned , it is a relatively simple engineering practice.
Importantly , you must use a piloted reamer to make sure the cut is concentric to the bore . Once opened out to the desired constriction , polishing is required to remove tool marks. A correctly sized Flexihone is ideal for this operation.
But opening out chokes is not exactly difficult, as mentioned , it is a relatively simple engineering practice.
Importantly , you must use a piloted reamer to make sure the cut is concentric to the bore . Once opened out to the desired constriction , polishing is required to remove tool marks. A correctly sized Flexihone is ideal for this operation.
Richard59
Well-known member
+1, my fat fingers would have put “none”, having personally used Teague I will confirm Wylye is offering very sound advice
Richard59
Well-known member
Don’t drink too much ,and may your aim be spot on next year......and one wishes you all the very best, am sure will see you soon
Richard59
Well-known member
Don’t drink too much ,and may your aim be spot on next year......
am sure you will be good too 
